Urgent water-damage calls answered 24/7Call (833) 596-0796

Source of the water

Progreso, TX

Shower Leak Water Damage in Progreso, TX

Our response crew cleans up shower leaks and overflows, including moisture behind tile, beneath flooring, and inside nearby wall cavities.

  • Urgent water-damage calls answered 24/7
  • Residential and commercial cleanup
  • Water extraction with managed drying
  • A clear response plan before work starts

Call (833) 596-0796Browse services

Signs to look for

When to call us for shower leak cleanup

We keep the field plan clear: If you notice any of these problems, call us before water has more time to spread into nearby materials.

A stain on the ceiling directly under the shower

We keep the field plan clear: Escaped pan water follows the joist bay and drops at the first low point it finds, which is rarely under the drain itself.

The floor just outside the shower feels soft or springy

To keep the work focused, we start here: Water that gets past the pan runs to the edge of the mortar bed and into the subfloor at the threshold.

Tiles in the shower floor sound hollow when tapped

We keep the field plan clear: Run a knuckle across the shower floor and listen for the tone to change from solid to empty.

Grout in the corners and along the curb keeps cracking

For a prepared response, we focus on this: Corners and the curb move slightly with the building, so rigid grout there cracks and reopens.

The ends of the curb are stained or the tile there is loose

Our technicians plan around this detail: A shower curb is waterproofed over the top and down both faces, and its two ends are where that wrap is hardest to finish.

Water pools on the bathroom side of the curb after a shower

From the first assessment, we look at this: A shower curb is built to shed water back inward, and a door sweep or threshold seal keeps the rest in.

What happens

How we handle shower leak cleanup

Our response crew adjusts the work to the rooms and materials exposed to water, where the water reached, and the materials that can be saved.

Isolating the shower from every other source of the water in the room

Our step-by-step approach makes this clear: Before we look at the pan we rule out the toilet, the sink and the supply lines feeding the shower.

A flood test of the shower pan

Our response crew uses a practical rule: The drain is plugged and the pan is filled to just below the curb, then watched over a set period.

A spray test of the walls, curb and door

From the first assessment, we look at this: If the pan holds, water is directed at the curb, the corners, the door sweep and the valve trim in turn.

The drain assembly and weep holes checked

To keep the work focused, we start here: A traditional pan drains twice: once through the visible drain and once through weep holes at the base of the drain body.

Moisture mapping of the floor, walls and the room below

Before equipment is placed, we consider this: A moisture meter reads the framing, subfloor, wall base and the ceiling underneath, and a thermal imaging camera reveals the shape of the wet area.

Tile sounded before anyone talks about removal

We keep the field plan clear: We tap the shower floor and the lower walls and mark what has debonded.

Reach our response crew

Water damage at Progreso, TX?

Describe where the water started, where it traveled, and the rooms or materials exposed.

Call (833) 596-0796

What to expect

What to expect from our response crew

We keep the field plan clear: Here is how we in most cases handle shower leak cleanup near Progreso, TX.

  1. 1

    Describe when the water reveals up

    Our step-by-step approach makes this clear: On the call we ask one question first: does the water appear during a shower, or with nothing running.

    Your call
  2. 2

    Take that shower out of service

    From the first assessment, we look at this: Stop using it and use another bathroom if you have one.

    +5 minutes
  3. 3

    Make the room below safe to be in

    Our response crew uses a practical rule: If a ceiling is stained or bulging underneath, keep people out from under it and leave the area lit from a doorway.

    +10 minutes
  4. 4

    Diagnosis on site, starting with the pan

    Our technicians plan around this detail: A crew arrives, meters the wet area and sets up a flood test on the pan.

    On arrival
  5. 5

    Openings agreed, then made

    Our technicians plan around this detail: We show you where access is needed and why, and we match your requires with the least visible wall wherever the drying allows it.

    First hours on site
  6. 6

    Equipment aimed into the assembly

    For a prepared response, we focus on this: Air movers deliver air into the wall cavity and under the flooring rather than across the room.

    Day 1
  7. 7

    Daily readings at the threshold, the cavity and the ceiling

    To keep the work focused, we start here: The three places that stay wet longest are the subfloor at the shower threshold, the framing behind the surround, and the ceiling below.

    Day 2 to 4

Understanding the cost

What can affect the price

As we organize the work, we account for this: We lay out the recommended response plan and price before you approve the job. For your property, the useful point is this: These examples show what might change the estimate.

Common situationWhat the estimate may includeTypical range
Shower leak caught early, drying the floor and wall base onlyFor your property, the useful point is this: National estimate for diagnosis, testing, professional drying equipment and monitoring where nothing requires removal.$500 to $1,500
Wet wall cavity drying behind a tub or shower, one bathroomWe keep the field plan clear: National estimate for controlled openings, cavity drying and daily readings behind the surround.$450 to $1,200
Shower leak that reached the subfloor and the ceiling belowOur response crew uses a practical rule: National estimate covering both rooms, including ceiling material removal, drying and cleaning.$2,500 to $8,000
Drying priced by affected area, clean waterFrom the first assessment, we look at this: National estimate used when the wet area is mapped rather than priced as a room.$3 to $7 per square foot
Tile and mortar bed removal, per square footWe keep the field plan clear: National estimate for removal and disposal of tile with a mortar setting bed.$3.00 to $8.00
Shower pan flood test performed on its ownAs we organize the work, we account for this: National estimate when the test is the only service requested.$150 to $400
Shower pan or membrane rebuild by a tile contractorOur step-by-step approach makes this clear: National estimate for the rebuild trade, not our work plan.$1,000 to $4,000
  • How long the shower has been leaking
    We keep the field plan clear: A few weeks means wet framing and a drying work plan.

  • Whether the tile and mortar bed have to come off
    For your property, the useful point is this: Drying can commonly be done through a small opening in an adjacent wall or from the ceiling below.

  • Which component actually failed
    During the response, we work from this fact: A door sweep or a caulk joint is a cheap fix once it is proven.

  • Access to the space under the bathroom
    As we organize the work, we account for this: A basement or crawl space under the shower lets us dry the subfloor and joist bay from below, which is faster and cheaper.

  • How much of the room below is involved
    Our response crew uses a practical rule: A single stain is a small work plan.

  • Equipment days in a small closed space
    For your property, the useful point is this: Bathrooms dry well because they are small, but tile and mortar release moisture slowly.

Why timing matters

What can happen when the area stays wet

Our field notes give this point special attention: Water can keep moving into nearby materials even when the surface looks dry.

Every shower adds to the loss

To keep the work focused, we start here: Unlike a burst pipe, this leak is switched on by the household.

The subfloor at the threshold loses strength

Before equipment is placed, we consider this: Plywood that goes through repeated wet and dry cycles delaminates in layers.

The mortar bed stays saturated and stops holding tile

We keep the field plan clear: A mortar bed sitting on a failed liner acts like a sponge that never gets to dry.

Mold can start within 24 to 48 hours inside the wall

Our response crew uses a practical rule: A wall cavity behind a shower is warm, dark and repeatedly rewetted, which is a favorable set of conditions.

Helpful service information

What to know about shower leak cleanup

Our field notes give this point special attention: First, note the short explanation. Our field notes give this point special attention: Open a card if you want a little more detail.

What is happening inside the property

To keep the work focused, we start here: At the bottom sits the preslope, a sloped bed that sends water toward the drain.

Read the explanation

Before equipment is placed, we consider this: A tile shower is a stack of layers, and knowing the stack explains every failure.

How the next step is decided

During the response, we work from this fact: Grout and tile are the wear surface, not the seal, and water passes through both slowly by design.

Read the explanation

During the response, we work from this fact: The grout myth costs homeowners more money than any other idea in bathroom repair.

What might change the work

Our step-by-step approach makes this clear: Mortar and tile hold moisture and release it gradually, so the room air can read normal while the setting bed is still saturated.

Read the explanation

For your property, the useful point is this: Drying a shower leak is different from drying a burst pipe, because the wet material is enclosed and slow.

Help near you

Shower Leak Water Damage near Progreso, TX

Match your requires with your area below, or call (833) 596-0796 and describe where the water started.

Common questions

Questions about shower leak cleanup

How do I know if my shower pan is leaking?

For a prepared response, we focus on this: Timing is the first clue. For your property, the useful point is this: If water appears during or shortly after a shower and nothing reveals with the water off, the assembly is leaking rather than a pipe.

Is my grout supposed to be waterproof?

As we organize the work, we account for this: No, and this is the most frequent misunderstanding in shower repair.

Can you fix a shower pan leak without removing the tile?

Before equipment is placed, we consider this: Sometimes the leak is at the curb, the door sweep, the valve trim or a corner joint, and those are repaired without touching the floor.

What is a shower pan flood test?

Our response crew uses a practical rule: The drain is plugged, the pan is filled with water to just below the curb, and the level is marked and watched over a set period.

What are weep holes and why do they matter?

Our step-by-step approach makes this clear: A traditional shower drain has small openings at its base that let water sitting on the pan liner escape into the drain.

There is a stain on the ceiling under my shower. How bad is it?

As we organize the work, we account for this: Check whether it darkens after a shower and fades between them, which points at the shower rather than a pipe.

How long does it take to dry a shower leak?

Our technicians plan around this detail: Three to five days is typical once the source is stopped and the equipment is in.

Reach our response crew

Water damage at Progreso, TX?

Describe where the water started, where it traveled, and the rooms or materials exposed.

Call (833) 596-0796

Areas we serve

Water-damage help near Progreso, TX

Our response crew serves homes, businesses, and managed properties throughout Progreso, TX and nearby communities.

View the area on Google Maps
Call (833) 596-0796